-
Email Us justwellautomation@qq.com
HONEYWELL T678A1163 Pneumatic Room Thermostat
Item NO.:
T678A1163Payment:
T/TPrice:
$1280Product Origin:
USAColor:
NEWProduct weight:
0.35kgLead Time:
In stockWe will arrange delivery within 3-5 days after receiving the payment.
Our express delivery: DHL and FedEx.
Quality packing for each product
Destination country all taxes & duty to be paid by buyer
Only part of the brand and model, if you have other product needs, please contact us.
The Honeywell T678A1163 is a two-stage electromechanical remote-bulb temperature controller designed to regulate the temperature of air or liquids in HVAC and industrial heating and cooling systems.
It uses a copper sensing bulb connected to the controller by a 20-foot capillary tube. The two SPDT switching contacts operate sequentially as temperature changes, allowing two-stage control of heating, cooling, dampers, or valves.
Model identification: This is a remote-bulb temperature controller, not a conventional wall-mounted pneumatic room thermostat. The T678A1163 is a Celsius-scale model.
|
Parameter |
Specification |
|---|---|
|
Manufacturer |
Honeywell |
|
Model |
T678A1163 |
|
Product Series |
T678A |
|
Product Type |
Two-Stage Remote Bulb Temperature Controller |
|
Control Principle |
Electromechanical, ON/OFF |
|
Temperature Setting Range |
-15°C to +35°C |
|
Maximum Operating Temperature |
52°C |
|
Sensor Element |
Copper bulb |
|
Bulb Dimensions |
13 mm diameter × 106 mm length |
|
Capillary Length |
6.1 m (20 ft) |
|
Output Contacts |
2 SPDT |
|
Fixed Differential |
1.7°C |
|
Adjustable Interstage Differential |
1.7°C to 5.6°C |
|
Supply / Switching Voltage |
120 / 240 / 277 VAC applications |
|
Maximum Connected Load |
2000 VA |
|
Mounting |
Controller can be mounted in any position |
|
Certifications |
UL, CSA |
Two-Stage Temperature Control: Two SPDT switches operate sequentially to control separate heating or cooling stages.
Remote Temperature Sensing: A 20-foot capillary tube allows the sensing bulb to be installed away from the controller.
Copper Sensing Bulb: Provides reliable temperature detection in air or liquid applications.
Adjustable Interstage Differential: Allows adjustment of the temperature difference between switching stages.
Flexible Installation: Controller can be mounted in different orientations.
Mechanical Operation: Electromechanical switching without requiring electronic programming.
HVAC heating and cooling systems
Air ducts and ventilation equipment
Boilers and hot-water systems
Industrial tanks and piping
Temperature-controlled dampers and valves
Two-stage heating and cooling equipment
Confirm the temperature setting range is suitable for the application.
Install the sensing bulb in the correct temperature measurement location.
Avoid bending, crushing, or damaging the capillary tube.
Check the electrical contact ratings and wiring diagram before connecting loads.
Ensure the two switching stages are wired according to the control requirements.
Disconnect power before installation or maintenance.