TELEMECANIQUE XS7C4A1MPG13 Inductive Proximity Sensor

We will arrange delivery within 3-5 days after receiving the payment.

Our express delivery: DHL and FedEx.

Quality packing for each product

Destination country all taxes & duty to be paid by buyer

Only part of the brand and model, if you have other product needs, please contact us.

• • • • • 

        • Specifications

          表格

          Item	Details
          Order code	XS7C4A1MPG13
          Product range	OsiSense XS, general-purpose inductive sensor
          Sensor series	XS7
          Sensor type	Inductive proximity sensor, rectangular block
          Housing size	40 × 40 × 117 mm
          Housing material	PBT plastic
          Mounting	Flush mountable in metal
          Nominal sensing distance Sn	15 mm
          Operating zone	0 … 12 mm
          Repeat accuracy	≤ 3 % of Sn
          Differential travel	3 … 15 % of Sn
          Wiring	2-wire
          Output function	1 NO or 1 NC programmable
          Output circuit	AC/DC
          Rated supply voltage Us	24 … 240 V AC 50/60 Hz; 24 … 240 V DC
          Supply voltage limits	20 … 264 V AC/DC
          Switching capacity	5 … 200 mA DC; 5 … 300 mA AC
          Residual current	≤ 1.5 mA at 120 V open state; ≤ 0.6 mA at 24 V open state
          Closed-state voltage drop	≤ 5.5 V
          Switching frequency	≤ 25 Hz AC; ≤ 50 Hz DC
          Response delay	Response ≤ 1.2 ms; recovery ≤ 1.8 ms; first-up delay ≤ 7.5 ms
          Connection	Screw-clamp terminals, 4 × 1.5 mm²; one PG13.5 tapped cable entry
          Status indication	Green LED supply on; yellow LED output state
          Detection face	5-position turret head
          Protection rating	IP65, IP67, IP69K
          Operating temperature	-25 … +70 °C
          Storage temperature	-40 … +85 °C
          Vibration resistance	25 gn, ±2 mm amplitude, 10 … 55 Hz
          Shock resistance	50 gn, 11 ms
          Net weight	Approx. 0.244 kg
          Certifications	CE, CCC, CSA

          Features and Advantages

          • 15 mm nominal sensing distance provides reliable detection of metal targets in industrial machines.
          • Flush mounting allows the sensor to be installed level with or inside metal surfaces.
          • Programmable NO or NC output suits different PLC/relay input logic requirements.
          • Wide 24 … 240 V AC/DC supply supports both common control voltages without a separate sensor supply.
          • Two-wire terminal wiring simplifies retrofitting and replacement in existing field circuits.
          • PBT housing and IP65/IP67/IP69K protection suit washdown, dust and wet industrial environments.
          • Green and yellow LEDs give clear supply and output-state feedback during commissioning and fault finding.
          • Five-position turret detection head allows the sensing face to be oriented toward the target.
          • Vibration and shock resistance support conveyor, packaging and machine-tool duty.

          Applications

          • Conveyor position, end-of-travel and part-presence detection
          • Packaging, filling, textile and material-handling machine sensing
          • Metal object counting, sorting and presence checks
          • Machine-tool limit and position monitoring
          • Valve, gate or actuator open/closed position feedback
          • Industrial automation where a robust rectangular inductive proximity switch is required

          Installation and Usage Notes

          • Inductive sensors detect metal targets only; non-metallic materials cannot be sensed by this principle.
          • Maintain the correct sensing distance and avoid mounting multiple sensors side by side beyond the manufacturer’s minimum spacing to prevent mutual interference.
          • Verify target size, material and thickness against the rated sensing distance; smaller or non-ferrous targets reduce effective range.
          • Set NO/NC output function and wire the two-wire circuit according to the required load and polarity.
          • Do not exceed switching current, voltage drop, residual current or switching frequency limits.
          • Use a PG13.5 gland and maintain IP rating; tighten terminals to the recommended conductor torque.
          • Avoid exposure to corrosive chemicals, solvents or mechanical impact outside the rated enclosure and environmental limits.
          • Check proximity to metal, shielding and mounting screws, because flush/non-flush installation changes the effective sensing range.

 Please make an inquiry for more models

SCHNEIDER BMXCPS3020

SCHNEIDER BMXXBP0400

SCHNEIDER BMXXBP0600

SCHNEIDER BMXXBP0800

SCHNEIDER BMXXBP1200

SCHNEIDER BMXDDI3202K

SCHNEIDER BMXDDI6402K

SCHNEIDER BMXDDO1602

SCHNEIDER BMXDRA1605

SCHNEIDER BMXDRA0805

SCHNEIDER BMXDDO3202K

SCHNEIDER BMXDDO6402K

SCHNEIDER BMXAMI0410

SCHNEIDER BMXART0414

SCHNEIDER BMXART0814

SCHNEIDER BMXAMM0600

SCHNEIDER BMXAMI0800

SCHNEIDER BMXAMI0810

SCHNEIDER BMXAMO0410

SCHNEIDER BMXAMO0802

SCHNEIDER BMXEHC0200

SCHNEIDER BMXEHC0800

SCHNEIDER BMXMSP0200

SCHNEIDER BMXERT1604T

SCHNEIDER BMXNOM0200

SCHNEIDER BMXCRA31200

SCHNEIDER BMXFTB2010

SCHNEIDER BMXFTB2820

SCHNEIDER BMXFCW303

SCHNEIDER BMXDDM16025

SCHNEIDER TSXAEG4111

SCHNEIDER 170AAI14000

SCHNEIDER 170INT11003

SCHNEIDER PC-A984-130

SCHNEIDER TSX08ED12R8

SCHNEIDER TSXAEY414

SCHNEIDER LAD8N20 038471

SCHNEIDER LC1-D0901

SCHNEIDER LR2-D3353/C

SCHNEIDER NC100H D100A

SCHNEIDER 140CHS11100

SCHNEIDER 140CPU53414A

SCHNEIDER 8201-5-1

SCHNEIDER GV2-S21C

SCHNEIDER GV7-RS150

SCHNEIDER LA7D1064 023040

SCHNEIDER LADN10 038374

SCHNEIDER LADN31 019632

SCHNEIDER LC1-D32

SCHNEIDER XBTF011110

SCHNEIDER 467NHP811DP

SCHNEIDER 140CPS12400R

SCHNEIDER XBTMEM08

Other best-selling products：