We will arrange delivery within 3-5 days after receiving the payment.
Our express delivery: DHL and FedEx.
Quality packing for each product
Destination country all taxes & duty to be paid by buyer
Only part of the brand and model, if you have other product needs, please contact us.
-
-
-
-
-

-
Foxboro / Schneider P0924WV — I/A Series Control System Module
Specifications
表格
| Item |
Details |
| Order code |
P0924WV |
| Manufacturer |
Foxboro, now Schneider Electric / Invensys legacy |
| System |
I/A Series DCS |
| Reported product type |
Communications interface module / fieldbus expansion module |
| Compatible platform |
I/A Series V2/V3 controllers and FBM fieldbus nodes; verify against project configuration |
| Network interface |
Distributor listings report dual 10/100/1000BASE-T RJ45 Ethernet ports |
| Protocols |
TCP/IP, UDP and Foxboro system communication protocols; exact protocol set depends on firmware |
| Redundancy |
Network-level redundancy possible with compatible redundant switch topology |
| Supply |
Backplane-sourced DC supply; third-party data report approx. 24 V DC / under 5 W, verify nameplate |
| Operating temperature |
Third-party listings: -20 … +60 °C; confirm official PSS document |
| Mounting |
Plug-in module in controller rack or FBM baseplate backplane |
| Status indication |
Front-panel LEDs for power, link and activity where fitted |
| Hot replacement |
Listed as field-replaceable/online-serviceable in DCS spare-practice notes |
| Certifications |
CE, UL 61010-1, FCC Part 15 per distributor data; verify actual unit marking |
Features and Advantages
- Provides the network connection between Foxboro I/A Series controllers, FBM I/O nodes and upper-level workstations.
- Dual Ethernet ports support redundant or segmented control-network paths in high-availability process systems.
- Integrates with the I/A Series controller architecture for real-time process values, alarms and control commands.
- Front-panel link/activity LEDs simplify local communication troubleshooting.
- Backplane mounting and modular design support spare-part replacement in legacy DCS maintenance.
- Suitable for continuous-process industries where stable controller-to-operator-station communication is required.
Applications
- Power plant boiler, turbine and balance-of-plant DCS communications
- Refining, chemical and petrochemical process control networks
- Water and wastewater treatment SCADA/DCS remote stations
- LNG, ammonia, pharmaceutical and utility distributed control systems
- Legacy Foxboro I/A Series spare-part replacement and network maintenance
Installation and Usage Notes
- Verify whether P0924WV in your shipment is an Ethernet communication module, annunciator keyboard module or another P0924 variant before ordering.
- Confirm compatibility with the controller model, I/A software revision, FBM baseplate and existing network firmware.
- Use shielded industrial Ethernet cabling, maintain Cat5e/Cat6 distance limits and route cables away from power cables.
- Check IP address, subnet, node name, redundancy setting and station configuration after installation.
- Observe ESD precautions when handling the module; seat it fully in the backplane and secure the front-panel screws/locks.
- Do not assume hot-swap support unless the controller and manual explicitly permit online module replacement.
- Verify supply voltage, power consumption, temperature range and certification from the unit nameplate or official Foxboro PSS document.
- For legacy systems, check spare-part availability, revision compatibility and migration options before new deployment.