-
Email Us justwellautomation@qq.com
SCHNEIDER BMXAMO0410H Modicon X80 Analog Output Module
Item NO.:
BMXAMO0410HPayment:
T/TPrice:
$650Product Origin:
JapanColor:
NEWProduct weight:
0.21KGLead Time:
In stockWe will arrange delivery within 3-5 days after receiving the payment.
Our express delivery: DHL and FedEx.
Quality packing for each product
Destination country all taxes & duty to be paid by buyer
Only part of the brand and model, if you have other product needs, please contact us.
The Schneider Electric BMXAMO0410H is an isolated analog output module in the Modicon X80 series, designed for demanding industrial environments. It provides four configurable output channels for controlling actuators, drives, and other equipment requiring analog signals. The H suffix indicates a hardened version for extended temperature ranges and harsh environments.
|
Parameter |
Specification |
|---|---|
|
Brand |
Schneider Electric |
|
Model |
BMXAMO0410H |
|
Product Series |
Modicon X80 |
|
Product Type |
Isolated Analog Output Module |
|
Number of Outputs |
4 |
|
Output Signal |
0–20 mA, 4–20 mA, ±10 V |
|
Resolution |
15 bits + sign |
|
Channel Isolation |
Yes |
|
Isolation Voltage |
Up to 1400 V DC between channels and bus/ground |
|
Current Load Impedance |
500 Ω maximum |
|
Voltage Load Impedance |
1000 Ω minimum |
|
Conversion Time |
≤ 1 ms |
|
Power Supply |
Via PLC rack |
|
Operating Temperature |
-25°C to +70°C |
|
Protection Rating |
IP20 |
|
Application Environment |
Harsh industrial environments |
Four isolated analog output channels.
Configurable current and voltage signals.
Hardened design for demanding industrial conditions.
Electrical isolation helps reduce interference between channels and the PLC bus.
Supports precise control of analog field devices.
Short-circuit and open-circuit detection, depending on output mode.
Industrial process control
Valve and actuator positioning
Variable-frequency drive control
Distributed automation systems
Chemical and manufacturing facilities
Confirm the output signal type required by the connected equipment.
Verify current-loop load impedance and voltage-output load requirements.
Use a compatible Modicon X80 rack and the correct terminal connector.
Disconnect power before installation or wiring.
Configure output ranges in the PLC application before commissioning.
All Categories
